
Why changing the locks is one of the first things to do
When you buy or rent a home, the previous occupants hand over a set of keys. It feels like the full set, and often it is the full set they remember. But a home has a history. Over the years, keys were cut for family members, friends, house cleaners, contractors, neighbors who watched the place during trips, and relatives who stayed a while. Some were returned and some were not. Some were lost in a drawer or a pocket. Nobody can say with certainty how many copies of your new front door key exist, or who holds them.
This is not an accusation against anyone. It is simply how keys behave. They spread, they get lost, they are forgotten. A reasonable response, and one that careful new owners and tenants often take, is to change the way the locks respond, so that only the keys you hold work. Doing this early, before you settle in, gives you control of your own doors. It is a quiet, practical form of peace of mind.
The question is how to do it. There are two main paths. The first is rekeying, which changes the internal pins of existing locks so that old keys no longer work and new keys do. The second is replacing, which removes the old locks and installs new ones. Each has advantages, and the best choice depends on the condition of the hardware, your goals for security and appearance, and your budget.
Many people assume that replacing is the only real option, or that rekeying is a cheaper but weaker alternative. Neither is true. A rekeyed lock in good condition is as secure as a new lock of the same grade, since the security comes from the mechanism and the key, and the key is new. A replacement lock brings new hardware and allows an upgrade, but it is not automatically stronger if the new lock is of lower quality than the old one.
This guide compares the two honestly, so you can weigh them without pressure. It also describes how a typical visit works, what to prepare, and how to avoid common mistakes. Everything here assumes you are the owner or the lawful tenant with permission from the owner to make changes. A renter should check the lease and ask the landlord before altering locks.
What rekeying involves and when it makes sense
Rekeying is the process of changing the internal arrangement of a lock cylinder so that it works with a different key. The cylinder holds a row of pins of various lengths. The old key lifts them to a certain pattern. To rekey, a technician removes the cylinder, takes out the old pins, and replaces them with a set that matches a new key. The cylinder is then put back in the lock. The outside of the lock looks unchanged, the latch and bolt stay in place, and the old keys no longer turn it.
Rekeying makes particular sense when the existing locks are in good working order. If the knobs and deadbolts turn smoothly, the finish looks acceptable, and the hardware is of decent quality, there is no need to throw them away. Rekeying keeps the hardware and changes only what controls access. It also allows you to key several locks to the same new key, so that one key opens the front door, the back door and the garage entry. This is convenient for a family that dislikes carrying a ring of keys.
Another advantage is speed. A rekey of several locks can often be completed in one visit, and it does not require drilling or carpentry. There is no need to match new hardware to the existing door preparation, since the old hardware is already fitted. This lowers the risk of surprises, such as a bore that does not match.
Rekeying has limits. It works only on cylinders designed to be rekeyed, which includes most common household pin tumbler locks. Some very cheap locks cannot be rekeyed, and some very old or worn ones do not hold their new pinning well. A cylinder with a worn keyway or loose pins may continue to be sloppy even after rekeying. In that case, replacing the cylinder or the whole lock is the better choice.
Rekeying also does not fix other problems. A lock that is weak by design remains weak. A loose latch, a failing spring, or a damaged strike stays as it was. If you want to upgrade security, rekeying alone will not do it, though it may be combined with other improvements. Rekeying with a restricted keyway or higher grade cylinder, for example, can raise the level while keeping the rest.
If you want a straightforward result, rekey when locks are sound and your goal is to know who holds the keys.
What replacing involves and when it is the better choice
Replacing means removing the existing locks and installing new ones. The new locks come with their own cylinders and keys, which are fresh and unknown to anyone else. The process includes removing the old hardware, checking the door preparation, fitting the new hardware, adjusting the strike, and testing the operation.
Replacement is the better choice in several situations. The first is poor condition. A lock that is stiff, sloppy, corroded, or damaged will not be improved by rekeying. If the latch sticks, the bolt does not extend fully, or the finish is badly worn, new hardware will serve better. The second is weak design. If the existing lock is a lightweight type that offers little resistance, installing a stronger model upgrades protection. The third is a desire for different features, such as a keypad, a lever instead of a knob, or a smart lock with remote control. These cannot be added by rekeying.
The fourth is mismatch. A house may have a jumble of lock brands and types, collected over years. Some doors have knobs, some levers, some have deadbolts, some do not. Replacing all of them with a matching set creates a uniform look and a consistent key system. It also simplifies future maintenance, since spare parts are the same throughout.
The fifth is a key system problem. If the existing locks are keyed in a way that cannot be unified, or if some are of types that cannot be rekeyed to match the others, replacement is simpler than a complicated workaround. The sixth is appearance. A tired, mismatched finish can make a home feel unwelcoming. New hardware refreshes the look of an entry.
Replacement has costs. The hardware itself is a purchase, and installation takes more time than rekeying. Fitting a new lock to an old door sometimes reveals problems that need correcting, such as an oversize bore, a damaged edge, or a worn strike. These are usually solvable, but they add effort. Measure before you buy, as described in the guide on backset and latch sizes, to avoid wasted purchases.
Replacement also gives a chance to add improvements at the same time: longer strike screws, a reinforced frame, better hinges, and a deadbolt where there was none. Done as a package, the result is a stronger door overall. If you are going to open up the door anyway, it makes sense to address these details.
Putting the two paths side by side
Seeing the two options in parallel makes the decision easier. Consider these points one at a time.
- Condition of the lock. Sound and smooth favors rekeying. Worn, sticky or damaged favors replacing.
- Security goals. Wanting only to retire unknown keys favors rekeying. Wanting stronger protection or new features favors replacing.
- Appearance. Happy with the look favors rekeying. Tired or mismatched hardware favors replacing.
- Number of doors. Many doors keyed alike favors rekeying for speed. A few doors needing new hardware favors replacing those specific ones.
- Time and disruption. Rekeying is quicker and less disruptive. Replacing takes longer and may involve door work.
- Future flexibility. Both options can be rekeyed again later, if the cylinders allow.
It is also worth noting that the choice is not all or nothing. Many owners rekey some locks and replace others in the same visit. A newly purchased home might have a good front deadbolt that can be rekeyed, a worn back door knob that should be replaced, and a garage entry lock that needs new hardware. A locksmith can mix approaches door by door.
Think also about keys. After either approach, you receive new keys. With rekeying, the new keys are cut to the new pinning, and the old ones become useless. With replacement, the new locks come with their own keys, and the old locks are gone. In both cases, the old keys are no longer a concern. A good practice is to ask for a few extra keys at the time of service, so you have spares for family members and for a trusted neighbor.
Another difference is record keeping. After rekeying, a professional may note the pinning of your locks in their records, and this makes later copies easy. After replacement, the new hardware may have a key code from the maker that can be used for copies. Whichever you choose, ask where the record is kept and who can request copies. Do not assume this is secret. Ask directly, and be sure you are comfortable with the answer.
Finally, consider the long run. A house you plan to keep for many years benefits from quality hardware. A short term rental or a place you plan to sell soon may not justify an upgrade. Match your investment to your plans, and do not feel pressure to buy more than you need.
Going through a new home door by door
A new home has more entry points than people expect. Walking through it with a notebook, before calling anyone, helps you decide what to do at each. Here are the usual places to look, with questions to ask at each.
The front door is the first. Check the knob or lever and the deadbolt. Are they the same brand and keyway? Do they work smoothly? Does the strike have long screws? Often the front door has both a latch and a deadbolt keyed differently, so you carry two keys. Keying them alike halves the keys on your ring.
The back door and any side doors come next. Rear doors are often an afterthought, with cheaper hardware and a single latch. Because they are less visible from the street, they deserve at least as much attention as the front. Check for a deadbolt, a solid strike, and sound hinges.
The garage entry door into the house is a major entry that people forget. It may connect the garage, which is easy to enter, to the heart of the home. Treat it as an exterior door and give it a deadbolt and a solid strike. Also consider the overhead door and any remote openers. Garage door remotes held by previous owners may still work. Reset the opener codes as a separate step, and ask the manufacturer or an installer how.
Sliding glass doors and windows are not locked by key cylinders, but they matter. A sliding door with a simple latch can be lifted or forced. A bar or pin lock in the track adds protection. This is general advice for any new home, regardless of keys.
Outbuildings and gates are common on properties in the Redding area. Sheds, workshops, barns, pump houses and gates each have their own locks. Some use padlocks, and some use older built in locks. Take inventory of these as well. A property with a gate may have a lock that dozens of people have used. Keying these to your own system or replacing padlocks finishes the job.
Interior doors with locks, such as a pantry, an office, or a bedroom, are lower priority but worth noting. And do not forget any mailbox lock, which is separate and often keyed by the postal system or a local arrangement. Ask about that separately.
As you walk, write the type, condition and keyway of each lock. Photograph each. This record is your guide for the decision and your reference for the future.
Making the decision and what a visit looks like
With your notes in hand, the decision becomes manageable. Sort the locks into three groups: sound enough to rekey, worn enough to replace, and unclear. For the unclear group, a professional can examine them and advise. In most homes, a mix emerges. For example, you may find that the front deadbolt and the garage entry lock are in good shape and can be rekeyed together, while the back door knob is worn and should be replaced.
When you call, describe the number and type of locks, the condition, and your goals. Mention if you want one key for several doors. Mention if you want to upgrade any. A quote follows the phone conversation, and you can ask what the visit will involve. Complicated cases, such as doors with unusual hardware or older mortise locks, may need a look in person before a firm plan. Ask what proof of occupancy or ownership you should have ready, such as a closing paper or a lease with the owner's permission. A careful provider will ask, because they want to be sure that the person changing the locks has the right.
On the day of the visit, clear access to each door and have your notes handy. The technician will check each lock, confirm the plan, and carry out the work. Rekeying typically involves removing cylinders, changing pins, and testing the new keys in each lock. Replacement involves removing and fitting. Either way, test every key in every lock before the visit ends. Turn each lock several times, from both sides, and check that the doors latch and unlatch smoothly.
Ask for the right number of keys. Think about every person who needs access: adults, older children, a caregiver, a neighbor for emergencies. More keys mean more chances for loss, so give each key a purpose. Store one spare in a safe place inside the home, not hidden outside.
Consider a worked example. A couple moves into an older home outside town. The front door has a good deadbolt but a worn knob. The back door has a hollow door and a single latch. The workshop has an old padlock and a gate chain. After walking the property, they decide to rekey the front deadbolt and the garage entry to one key, replace the front knob and back door hardware with matching sets keyed alike, and swap the padlock for a sturdy one keyed to their system. Two keys serve the whole house, and one serves the workshop and gate. They store a spare inside the home. The change takes one visit, and they sleep better that night.
Whatever you choose, doing it early is wise. The first week in a new home is the right time, before routines settle in. Rekeying and replacing are both good tools. Choose the one that fits the lock you have, and you will start your time in the home with keys that only you control.
A few cautions round out the picture. First, be wary of any plan that skips the testing step. Every key should be tried in every lock it is meant to open, and the old keys should be tried too, to confirm that they no longer work. If an old key still turns a rekeyed lock, something was missed, and it should be corrected on the spot. Second, be careful with the old keys themselves. Do not hand them to a new tenant, a friend or a relative as if they were still useful. Keep them for a short time in case a lock was missed, then dispose of them.
Third, remember the parts of a home that are not keyed by a cylinder. Garage door openers, gate remotes, alarm codes, keypad codes and any lock box codes were set by the previous occupants and may still be known to them. Change each of these as part of the same project. A new key on the front door does little if an old garage code still opens the overhead door and the entry from the garage into the house. Make a list of every code and remote you inherited, and cross each one off as it is reset.
Fourth, think about people who should have access. A new home may have a caregiver, a relative who helps with children, or a neighbor who watches the property during travel. Decide in advance who gets a key and keep a short note of it. When circumstances change, update the note and rekey if necessary. A written list is a simple tool that makes later decisions easy.
Finally, if you are a renter, speak with the owner before any change. Many leases require the owner to approve locks, and some owners prefer to rekey between tenants themselves. Ask what is allowed and who pays, and keep the answer in writing. A cooperative approach protects the relationship and the property, and it keeps everyone clear about who holds which key.
Last, keep the paperwork from whatever you choose. Note the date, the doors worked on, the type of hardware and the number of keys made. If you ever sell the home or leave the rental, that record helps the next person and shows that the locks were handled with care.